Common Questions

Question - We've tried Pressure Rollers before, but they don't work.
Answer - Speed Rollers^® is not a Pressure Roller. It is a low pressure, externally fed dual roller applicator. It requires a minimal flow rate of 0.31 gallons per minute to achieve higher production. Speed Rollers^® apply acrylic, alkyd, epoxy, block filler and urethane coatings to interior and exterior surfaces.

Question - Sounds like a great product to purchase, but how much do I have to invest in replacement costs?
Answer - Roller sleeves and fluid lines are disposable. Why use productive time on non-productive tasks such as cleaning equipment? Roller sleeves and fluid line sundries cost a fraction of what this tool will save you in one day. Remember, you will not need as many additional supplies while using this tool compared to standard spraying equipment. Visqueen covering and masking materials costs per week far exceed the cost of a Speed Rollers^® assembly. You will spend less time covering and more time applying surface materials.

Question - My workers all prefer to use sprayers or traditional rolling methods. We've done it for decades and we've been profitable. Why should I change?
Answer - This product will make you even MORE profitable. Imagine how your bottom line is impacted when finish your job in 50% to 90% less time using the Speed Rollers^® system.

Question - How do I justify the outlay for your applicator?
Answer - Because of the reduction in both prep time and application time you will see payback within hours to a week of use, depending on your volume.

Question - I've never heard of TRAC TOOL or Speed Rollers^®. What is your history?
Answer - TRAC TOOL, INC, is located in Cleveland, Ohio. TRAC Tool does all manufacturing and assembly in the United States. The company's flagship product is Speed Rollers^®.

Question - What is your warranty policy?
Answer - TRAC Tool stands behind all of of their products with a full warranty. If you find any manufacturing defects in your Speed Rollers^® within one year from date of purchase, you can return it to us and we will ship out a new unit at no cost. Shipping unit to TRAC Tool is the responsibility of the customer.

Question - How much does the product weigh?
Answer - Speed Rollers weighs less than two pounds in applicator mode.

Question - What is Speed Roller made of?
Answer - Speed Rollers has 14 parts and is made up of aluminum, composite and plastic tubing and two rollers.

Question - How much testing was done on this product before release?
Answer - The first prototypes of Speed Rollers^® were field tested for six months on commercial and residential projects. Speed Rollers are currently in use on a wide variety of appications, applying a variety of coatings.

Question - Does this product comply with U.S. Environmental mandates/policies?
Answer - Yes. Because there is no overspray with roller type devices, Speed Rollers is very environmentally friendly.

Question - Does it waste paint by dripping?
Answer - No. Speed Rollers^® has a 90+% transfer efficiency! There is very limited dripping or splashing because of a carefully designed drip guard and splashguard.

Question - From an ergonomic perspective, how will I be affected while painting?
Answer - Speed Rollers^® are very user-friendly. Balanced, lightweight and no need to dip rollers before application. A low pressure system eliminates the dipping and minimizes back roll.

Question - What is your return policy?
Answer - Unused commercial and industrial Speed Rollers^® may be returned to TRAC Tool within ten days of purchase for full refund, less shipping and handling costs.